Products
Our Products
EE-B100 100kA Surge Protection Modules(2 Pole & 4 Pole)
The module so strong that it is tested for a direct lightning sites. These are giving rough protection as a first line of defence and equivalent to Type 1 protection for one instance of direct lightning event. It is not recommended for known direct lightning sites as it sacrifices after one direct strike. The protection level is 5000V which is slightly higher than complete protection requirement. But this modules are good enough to protect your electrical devices like fans and filament bulbs. But not enough for electronic devices like LED bulbs & LED TVs.
Technical Specification:
| Model Name | EE-B100 |
| Maximum Continuous Operating Voltage(Uc) | 420V |
| Maximum capacity(kA) | 100kA(1 time,8/20uS) |
| Nominal Capacity(kA) | 60kA(2 times,8/20uS) |
| Response time(nS) | <25nS |
| Voltage Protection Level(Up) | <2.5kV |
| Installation | 35mm standard DIN rail |
| Shell Material | UL94-V-0 flame retardant plastic |
| Fuse/MCB recommended | 6A HRC / C6 MCB |
NB: Surge Protection work well with good earthing. Please measure your earthing before installation.
EE-B100 60kA Surge Protection Modules(2-Pole & 4-Pole)
These modules are good enough for Type 2 protection. But they may need replaced in once in an year as per our experience, if used only as a single level of protection. But if you use only one level of protection, then the strike ending the life of the module can damage your devices also.
Technical Specification:
| Model Name | EE-B60 |
| Maximum Continuous Operating Voltage(Uc) | 420V |
| Maximum capacity(kA) | 60kA(1 time,8/20uS) |
| Nominal Capacity(kA) | 40kA(2 times,8/20uS) |
| Response time(nS) | <25nS |
| Voltage Protection Level(Up) | <2.1kV |
| Installation | 35mm standard DIN rail |
| Shell Material | UL94-V-0 flame retardant plastic |
| Fuse/MCB recommended | 6A HRC / C6 MCB |
NB: Surge Protection work well with good earthing. Please measure your earthing before installation.